HV-310J FPV FullHD Video Transmitter, HDMI/ CVBS to ISDB-T/-Tb modulator

Description

HV-310 is the most cost-effective solution to transmit long range HD video for FPV application with digital TV technology.
The video input source from either HDMI/DVI or composite (CVBS) is encoded in H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air.
All DVB-T/ISDB-T/ ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-310 via the standard coaxial cable or antenna.
HV-310E supports EN 300-744 DVB-T modulation while HV-310J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb modulation.
(Note:
HV-310J supports only H.264 encoding while old Japan ISDBT TV cannot support it.)
HV-310 supports 170MHz~1350MHz (
excluding 950~1090MHz
) band transmission.
With embedded high power amplifier design, the RF output power can reach up to +15dBm for the frequency range 474~930MHz.
HV-310EH/HV-310JH is special edition with high gain design for 1.2G band, which supports higher output power in 1.2G band while lower in 170-950MHz band.
Features
Low Cost HD Video Distribution
Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV.
In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
Versatile video inputs
Support HDMI/DVI and composite (CVBS) video input.
Easy to Configure
Channel number can be configured with the IR RC easily.
More advanced configurations can be set from an external host like PC/NB thru serial port interface.
Robust, Reliable and Long Distance
Easily transmit 1080p video over a single
3C
2V/RG59 cable for at least 500 meters long without adding any repeater.
For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality.
Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
Daisy-chain Connection (Bus-Topology)
Multiple HV
-310’
s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
Real time protocol and Low latency
No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency
Order Information:
Model
Features
HV-310E
DVB-T (H.264 only), channel frequency range 170-1350MHz (excluding 950~1090MHz)
HV-310EH
DVB-T (H.264 only), channel frequency range 170-1350MHz (excluding 950~1090MHz)
(Optimized for 1.2G band output power)
HV-310EH-PA1200
DVB-T (H.264 only), channel frequency range 170-1350MHz (excluding 950~1090MHz)
(Optimized for 1.2G band output power)
With 1.2G band power amplifier (+20dBm output)
HV-310J
ISDB-T (H.264 only), channel frequency range 170-1350MHz
HV-310JH
ISDB-T (H.264 only), channel frequency range 170-1350MHz
(excluding 950~1090MHz)
(Optimized for 1.2G band output power)
HV-310JH-PA1200
ISDB-T (H.264 only), channel frequency range 170-1350MHz (excluding 950~1090MHz)
(Optimized for 1.2G band output power)
With 1.2G band power amplifier (+20dBm output)
General Specifications:
Input
Video: CVBS, HDMI 1.3
Audio: Stereo line-in or HDMI PCM audio-in
Compression
Video: H.264
Audio: AAC or MPEG
Resolution
Input
CVBS
720x480x30I (NTSC, D1)
720x576x25I (PAL, D1)
HDMI
720x480x30I (NTSC, D1)
720x576x25I(PAL, D1)
1280x720x50I/1280x720x50P
1280x720x60I/1280x720x60P
1920x1080x24P
1920x1080x50I/1920x1080x50P
1920x1080x60I/1920x1080x60P
Video Output
Compression:H.264
Frame size:
720x480x30P (NTSC, D1)
720x576x25P (PAL, D1)
1280x720x25P
1280x720x30P
1920x1080x24P
1920x1080x25P
1920x1080x30P
Note: the output frame size is the same as the input, no scale-up or scale-down feature supported
Power
HV-310 without PA
5 V or 6~16V DC
800 mA@5V
(AV Sender TX V01 5V only)
HV-310-PA900
HV-310-PA1200
5 or 6~12V DC
1450 mA@5V
Dimension WxDxH
W(105 mm) x D(75 mm) x H(35 mm)
(Bare bone PCBA size: 100mmx70mm)
Weight
175g
(Bare bone PCBA weight 55g)
Operating Temperature
-10
℃
~ 60
℃
Digital TV RF Transmitter Specifications:
Parameter
Value
TV Standard
HV-310E/EH
DVB-T EN-300 744
HV-310J/JH
ISDB-T ARIB STD-B31
ISDB-Tb
ABNT NBR 15601
RF connector
50-Ω SMA connecter
Bandwidth
HV-310E/EH
1/2/3/4/5/6/7/8 MHz
HV-310J/JH
6MHz
FFT
2K, 4K, 8K
Code rate
1/2, 2/3, 3/4, 5/6, 7/8
Guard interval
1/4, 1/8, 1/16 or 1/32
Frequency range
170~1350MHz, step size 1KHz
Segment & Layer
HV-310E
n/a
HV-310J
13 Seg
ONLY
Time Interleaver
HV-310E
n/a
HV-310J
Not supported
RF Output Level (dBm)
Hv-310E/HV-310J **
Frequency
177.5
MHz
474
MHz
666
MHz
858
MHz
915
MHz
1250
MHz
Max
5
15
16
15
14
0.5
Hi-gain
0
10
11
10
9
-4.5
Low-gain
-20
-10
-7
-8
-9
-21
HV-310EH/HV-310JH **
Frequency
177.5
MHz
474
MHz
666
MHz
858
MHz
915
MHz
1250
MHz
Max
-10
7
10.5
11.5
11.5
5
Hi-gain
-14.5
2
5.5
6.5
6.5
2.2
Low-gain
-34
-18
-14
-14
-14
-18
HV-310EH-PA1200
HV-310JH-PA1200
(with 1.2G Power Amplifier)
1200~1350MH
Max:22 dBm, Hi-gain:19 dBm, Low-gain:-1 dBm
Digital Gain/Attenuator
for Fine Tuning
r
ange: +5dB~-10dB , Step size 1dB
(Default: +0dB)
MER
170~1350MHz, 25~33 dB*
(950~1090 MHz is not supported)
Spectrum Shoulder
(Adjacent channel)
40dB
Phase noise
<-92dBc @ 10kHz
Carrier Suppression
>42dB
Specifications are subject to change without prior notice.
*: There could be MER loss in high gain/attenuation level.
**: HV-310E/HV-310J vs HV-310EH/HV-310JH RF output power
HV-310 Application Scenario-FPV
HV-310 Application Scenario-Wireless
HV-310 Application Scenario-Wired
System Deployment Example – Daisy-Chain Bus Topology
HV-310 Application – Live Video Broadcast