Tugicom TX190 - 1W STEREO VHF FM EXCITER TRANSMITTER WITH RDS ENCODER

Description

TX190
World wide Shipping
Quick Delivery & Order Tracking
Highest Quality
Features
Exciter
Stereo Encoder
Limiter
RDS Generator
Features
Exciter
Stereo Encoder
Limiter
RDS Generator
Compact size - SMT design
Single power supply with onboard voltage regulators
Microprocessor controlled with LCD display
Excellent audio response
Selectable Pre-emphasis: None, 50uS or 75uS
Balanced shielded XLR input connectors
Audio Limiter Stereo Encoder using a modern DSP technology
RDS (Radio Data System)
Excellent VCO with low distortion
Phase Lock Loop (PLL) system with 50Khz steps for worldwide operation
Full Broadband design – no tune for 87.5MHz -108MHz
1W RF output power with LPF for clean spectral
RF Output Power: 1Watt typical (1.5W MAX)
Frequency range: 87.5Mhz-108Mhz no-tune
Output Impedance: 50 Ohms
Output connector: SMA
Frequency steps: 50Khz
MPX or SCA input: BNC unbalanced 10Kohm impedance
Harmonic output: 75dB
Spurious output: 75dB
Out of lock RF power-down: <-55dB
S.N.R: >75dB
Sub-carrier generation: over-sampled x 8
Pilot generation: 19Khz ± 2Hz ( over-sampled x16)
Stereo separation: >55dB (20Hz-15Khz)
MPX output level: unbalanced 75ohm (BNC connector)
Audio input connector: Balanced XLR
Input impedance: 10Kohm
Pre-emphasis: None, 50uS or 75uS
Input CMRR: >65dB
Frequency response: 20Hz–20Khz
Operation mode: Stand alone
Programming with a standard PC LPT port
Data Storage: EEPROM during power off
On/Off selecrable from main LCD display
Signal Bandwidth: 2.4Khz
RDS carrier: 57Khz (over-sampled x 3.2)
Conforms to CENELEC EN50067
4 modes of Dynamic/Scrolling PS
Supports: PI,PS,PTY,TP,AF,TA,DI,M/S,RT,UDG
TX190
The
TX190
is the most advanced fm exciter available on the market. Knowledge and experience of years are combined to a compact board which does it all. The audio input are balanced XLR, the audio is being limited to keep modulation at safe level. The stereo encoder uses a DSP technology to perform a cleaner pilot with excellent separation. RF output is 1W clean RF after a LPF and wideband for 1W + output at any frequency. The
TX190
also includes internal RDS for almost any feature available, including scrolling text, real-time update and much more. This exciter is controlled simply with a LCD and up/down buttons.
video :https://www.youtube.com/watch?v=6ZRbhZSWH38
Click here to see description
TX190
Features
Compact size - SMT design
Single power supply with onboard voltage regulators
Microprocessor controlled with LCD display
Excellent audio response
Selectable Pre-emphasis: None, 50uS or 75uS
Balanced shielded XLR input connectors
Audio Limiter Stereo Encoder using a modern DSP technology
RDS (Radio Data System)
Excellent VCO with low distortion
Phase Lock Loop (PLL) system with 50Khz steps for worldwide operation
Full Broadband design – no tune for 87.5MHz -108MHz
1W RF output power with LPF for clean spectral
Exciter
RF Output Power: 1Watt typical (1.5W MAX)
Frequency range: 87.5Mhz-108Mhz no-tune
Output Impedance: 50 Ohms
Output connector: SMA
Frequency steps: 50Khz
MPX or SCA input: BNC unbalanced 10Kohm impedance
Harmonic output: 75dB
Spurious output: 75dB
Out of lock RF power-down: <-55dB
S.N.R: >75dB
Stereo Encoder
Sub-carrier generation: over-sampled x 8
Pilot generation: 19Khz ± 2Hz ( over-sampled x16)
Stereo separation: >55dB (20Hz-15Khz)
MPX output level: unbalanced 75ohm (BNC connector)
Limiter
Audio input connector: Balanced XLR
Input impedance: 10Kohm
Pre-emphasis: None, 50uS or 75uS
Input CMRR: >65dB
Frequency response: 20Hz–20Khz
RDS Generator
Operation mode: Stand alone
Programming with a standard PC LPT port
Data Storage: EEPROM during power off
On/Off selecrable from main LCD display
Signal Bandwidth: 2.4Khz
RDS carrier: 57Khz (over-sampled x 3.2)
Conforms to CENELEC EN50067
4 modes of Dynamic/Scrolling PS
Supports: PI,PS,PTY,TP,AF,TA,DI,M/S,RT,UDG
The
TX190
is the most advanced fm exciter available on the market. Knowledge and experience of years are combined to a compact board which does it all. The audio input are balanced XLR, the audio is being limited to keep modulation at safe level. The stereo encoder uses a DSP technology to perform a cleaner pilot with excellent separation. RF output is 1W clean RF after a LPF and wideband for 1W + output at any frequency. The
TX190
also includes internal RDS for almost any feature available, including scrolling text, real-time update and much more. This exciter is controlled simply with a LCD and up/down buttons.